In order to ensure safety, the movable clamp should be fastened when wearing the electric hanging basket, and it is not allowed to be used at high temperature above Celsius. When you use it every day, you should check the appearance first, and stop using it immediately if it is damaged. Safety ropes should be hung high to prevent swinging and collision, and long ropes over one meter should be buffered. It is not allowed to tie the rope, but should be hung on the connecting ring or sawtooth ring. Should be cleaned regularly, do not be exposed to open flames, acid, and do not collide with sharp objects. Don't expose your seat belt to the sun. After two years of use, the safety belt should be sampled in batches, the static load test should be carried out on the fence belt, and the impact test should be carried out on the suspended safety belt. After passing the test, this paper briefly introduces the safety belt personal protective equipment to prevent the casualties of white aerial workers. It is composed of a harness, a harness, a safety rope, a belt, a buffer, a sling and other parts. The harness is marked according to the requirements of the national safety belt for aerial work: static tension n, load time min, test cycle year; harness: static tension n, load time min, test cycle year, semi-circular pin ring, square chest (leg) with clip drill buckle, safety hook triangle ring with clip, and main technical parameters of safety belt for aerial work: total length-belt:.