1. Create a new file with 1000*700 pixels, select the gradient tool, set the color as shown in figure 1, and pull the radial gradient from the center to the corner as shown in figure 2 as the background color.
Second, from top to bottom, the top text effect is as follows.
3. Open the material shown in Figure 4. The file is in PNG format. Drag it, unlock it and move it to the appropriate location. Use the lasso tool to select the top text and press Ctrl+J to copy to the new layer.
#p# Subtitle #e#
4. Hide other characters, lock the copied characters in the pixel area, then select the gradient tool, set the color as shown in Figure 6, and pull out the linear gradient as shown in Figure 5.
5. Press Ctrl+R to bring up the ruler, and then pull two intersecting reference lines. The intersecting position is the perspective center point, which will be used later.
6. Add layer styles to the current layer, and set them respectively: bevel and relief, inferior and texture. The pattern of the textured portion can be arbitrary. The parameter setting is shown in Figure 8- 10, and the effect is shown in Figure 1 1.
Seven, press Ctrl+J to copy the current layer, and then double-click the layer thumbnail to bring up the layer style, remove the contour line and texture style, and slightly modify the parameters of slope and landform, as shown in figure 12. After confirmation, change the opacity of the layer to 50% and fill it to 0%, and the effect is shown in figure 13.
#p# Subtitle #e#
Eight, create a new group on the background layer, create a new layer in the group, and now start making the text solid surface. Starting from the intersection of reference lines, tick off the selection as shown in figure 14 with a pen, select the gradient tool, set the color as shown in figure 15, and pull out the linear gradient as shown in figure 16 as the color of the solid surface.
9. Create a new layer, press Ctrl+Alt+G to create a clipping mask, tick off the selection as shown in figure 17 with a pen, and add gradient colors as shown above.
10. Create a new layer, create a clipping mask, tick off the following selection with a pen, and add the same linear gradient. The gradient settings of solid surfaces are consistent.
1 1. Create a new layer, tick off the selection below with a pen, and add gradient colors.
XII. The manufacturing method of other solid surfaces is the same. Pay attention to the direction of gradual change. The process is shown in Figures 20, 265 and 438+0.
#p# Subtitle #e#
Thirteen. The method of making other solid surfaces is the same, as shown in Figures 22 and 23.
Fourteen, the same method to make intermediate text effect, the process as shown in figure 24-28. There are many solid surfaces, so pay attention to the hierarchical relationship.
Fifteen, the bottom of the wing is also done, and the effect is as follows.
Finally, adjust the details to complete the final effect.
#p# Subtitle #e#
How does ps make three-dimensional characters commonly used in posters? First of all, you should make sure that your ps font has a simplified square yellow grass. If not, you can use a thicker font instead.
Create a new file with a width of 600 and a height of 800, or you can choose it yourself.
Create a new layer. Select a font. Select the text tool and type the word "integrity".
Ctrl+t, enlarge the font until there is no dot on the left or right.
Right-click the layer to rasterize it.
Choose filters, stylize and diffuse.
Then lock the transparent pixels, use the lasso tool to frame the "independent speech" and fill it with red.
Frame the letters with lasso tool and remove them with moving tool.
Create a new layer, draw a circle in Yan Lidan and fill it with white.
Select the rectangle tool and draw a rectangle as shown in the figure, with black foreground and white background. Select a gradient, a horizontal gradient, and a fill gradient.
Select custom tools and arrows. Put it in the right place. Ctrl+ Enter becomes a selection and is filled with white.
Select vertical text and type.
Just type the rest of the words. You can also use a brush. It is easy to find mottled edges.
Ps How to Make Stylish Poster Text/Steps
1 first, quickly connect ctrl+N to create a new RGB file. The file size is up to me. I used 1024* 1080 pixels.
2 Using the text editing tool, select horizontal text and enter "u" in the picture.
3 After input, click the "√" button in the upper right corner.
4 Use the above method to input "energy" and "play" in turn.
Adjust its font, color, size and position as needed. I use the font that comes with ps. In fact, there are still many beautiful fonts in ps! Everyone should be good at discovering!
6 Select three layers of U, can and play, press ctrl+E to merge, and double-click the merged new layer to name it "New". Note that the text at this time has been rasterized and cannot be modified. Everyone must correct it in the last step.
7 Select the layer "play", hold down ctrl+T, rotate the text by a certain angle, and press Enter to confirm the operation.
Double-click the new layer, or press the fx icon displayed below the layer to open the layer style dialog box, select the stroke, and then select the appropriate color and stroke thickness.
9 After adjusting the strokes, add a projection effect to the text, click the projection inside the layer style, adjust various parameters, and increase the three-dimensional sense of the text.
10Ok, our fashion poster is ready! Everyone should pay attention to the selection of the following fonts. I think the font I chose is very artistic. If you don't have enough fonts in ps, you can download resources online yourself! How does ps make fashion poster characters
1. Posters must first determine the layout of the poster, that is, determine the aspect ratio (for example, 5:3 or 10:7), and then select the background that conforms to the aspect ratio. Here, a ready-made background is used as a demonstration, and no more processing is needed.
2. After opening the background picture with PS, copy a background picture layer (customary operation), and then create a new blank layer.
3. Next, text materials will be used. The text can be edited by the text editing function of ps, or you can use the material file. Here, the material file is used first. Put the text material into the blank layer, then adjust the position and confirm the placement.
4. Mask with the color range of the mask, so that the white background of the text is hidden and the text is placed in the poster.
5. Then select the filter, external luminous filter. Make the text stand out. (Of course, what special effects and words are used according to personal aesthetics)
6. After editing the theme text, add some detailed text with the command of Add Text.
7. Finally, add some small decorations (such as flying crows) so that the poster is finished. Of course, this is just a simple demonstration, so it's just a very rough work. Of course you can make more beautiful works. Making fashion posters has the following points:
1. First, quickly connect ctrl+N to create a new RGB file, and the file size is determined by yourself.
2. Use the text editing tool to select horizontal text.
3. After entering, click the √ button in the upper right corner.
4. Enter the words or English letters in turn by the above method.
5. Adjust its font, color, size and position as needed.
6. Select the word or English letter layer, press ctrl+E to merge, and double-click the merged new layer to name it "new". Please note that the text at this time has been rasterized and cannot be modified, so the previous step must be modified correctly.
7. Select the layer "Select words or English letters, hold down ctrl+T, rotate the words by a certain angle, and press Enter to confirm the operation. 8. Double-click the new layer, or press the fx icon displayed below the layer to open the layer style dialog box, select the stroke, and then select the appropriate color and stroke thickness.
9. After adjusting the strokes, add a projection effect to the text, click the projection inside the layer style, adjust various parameters, and increase the three-dimensional sense of the text. To make a poster, the most basic thing is composition. Consider layout and size first. Generally speaking, posters to be printed need a resolution of 300 pixels per inch. If you only need 72 on the computer. The color mode to be printed is set to cmyk, and the rgb mode is displayed on the computer. Set the size to 800x600 and start drawing. Of course, you can change the size of the canvas appropriately. Remember to always keep complicated posters. Because the psd file size of a poster is often tens of meters, temporary files will consume a lot of memory. Look for the material on the internet after you have conceived it. Unless you are a professional who can draw by yourself (pictures are also copyrighted), if you use them for commercial purposes, try not to quote pictures that are too xx. Then it's up to you to open the ps and organically integrate them into a work. Posters are generally saved as pictures in jpg format. In addition, it is popular to use illustrator to draw posters of vector pictures. Download font template, with ps