Preparation before installation
Before installing AO Smith water heater, we need to do some preparatory work. First of all, we need to buy some necessary installation tools, such as wrenches, screwdrivers and pliers. Secondly, we need to choose a good installation location to ensure that the water heater is placed stably, well ventilated and close to the water source and power supply. Finally, we need to check whether the accessories of the water heater are complete and read the installation instructions of the water heater carefully.
Installation step
1. Determine the installation position: First of all, we need to determine the installation position of the water heater and punch a fixed hole in the wall.
2. Install the bracket: fix the bracket on the wall with screws to ensure the bracket is horizontal.
3. Install the water pipe: connect the water inlet pipe and the water outlet pipe to the water heater, and tighten the nut with a wrench.
4. Connect the power supply: connect the power cord to the water heater and wrap it with insulating tape.
5. Installation of flue: According to the model and installation position of the water heater, install the corresponding flue to ensure that the waste gas discharged by the water heater can be discharged smoothly.
6. Install the water heater: put the water heater on the bracket and fix the water heater on the bracket with screws.
7. Connect the power supply and water source: After confirming that the installation is correct, connect the power supply and water source for leakage protection and water pressure test.
Matters needing attention
1. Inspection before installation: Before installation, be sure to check whether the accessories of the water heater are complete and read the installation instructions of the water heater carefully.
2. Selection of installation location: The installation location must be stable, well ventilated and close to water and power supply.
3. Preparation of installation tools: Before installation, it is necessary to prepare necessary installation tools, such as wrenches, screwdrivers and pliers.
4. Installation process: During the installation process, you must follow the installation instructions of the water heater, and you are not allowed to change or omit any steps without authorization.
5. Safety: During installation, attention must be paid to safety to avoid electric shock, scald and other dangerous events.