Current location - Health Preservation Learning Network - Fitness coach - Installation method of Yingjue 'ai treadmill
Installation method of Yingjue 'ai treadmill
Yingjue treadmill is one of the most popular fitness equipment, whether it is household equipment or gym. Although installing the Yingjue treadmill is relatively simple, it also requires some patience and skill. The following is the installation method of Yingjue treadmill:

1. Preparation environment: The first step in installing the Yingjue treadmill is to choose a suitable location. This position is best spacious, well ventilated and well lit. In addition, this position should be flat, and there should be no sundries or obstacles on the ground.

2. Install the base: The base is the key component to support the treadmill. First, you need to loosen the nut at the bottom, and then fix it with screws. After fixing, it is necessary to erect the base to ensure that the bracket is in a vertical position. It should be noted that when installing the base, make sure it is stable on the ground.

3. Install the side plate: put the side plate on the base. First, the nuts of the mounting wheel fixing plate of the side plate need to be tightened. Then, rivet the wheel on the base with bolts and fasten the side plates. Make sure that the side plates are completely aligned with the screws on the base.

4. Connecting the waist wheel: Connect the waist wheel to the fixer on the side plate. It is necessary to stick the fixer on the waist wheel and fix the fixer on the side plate with screws. Make sure that the waist wheel is in the correct position.

5. Install the treadmill handle: insert the handle into the guide rail of the side plate. The designer of the handle of Yingjue treadmill skillfully designed that the bucket needs to be turned over with the handle.

6. Connect the panel with the running belt: Connect the panel with the running belt. First, tighten some screws of the surface plate to the base with a wrench. Then, transport the running belt under the big roller of the treadmill to ensure that the center of the running belt is completely aligned with the center of the big roller. Slowly squeeze the running belt from the base to the guide plate. If there is any problem, please be careful when squeezing the running belt.

7. Plug in: After installation, if you want to use the Yingjue treadmill, you need to plug in the treadmill and select the required options through the console.

In a word, the installation process of Yingjue treadmill needs some patience and experience. It will be very convenient to read the installation instructions carefully and install according to the steps. If you have any questions, please feel free to contact the seller or customer service, who will provide professional technical support.