People often ask how often and how to lubricate the running belt of the treadmill in Taiyuan 153 Fitness Equipment City. In fact, it is not difficult to run with lubrication, it only takes 20 minutes to get it easily!
What tools do you need for running belt lubrication of treadmill?
Some treadmills are very simple to operate and don't even need any tools, but some treadmills may need to remove the running belt first. You only need a wrench and a screwdriver to be completely OK.
Does the new treadmill need to lubricate the running belt?
Need. When using a treadmill for the first time, most treadmill manufacturers require lubricating the running belt. Although the treadmill has been lubricated before leaving the factory, the lubrication effect is poor after being placed in the warehouse for a period of time.
Fruit has been reduced.
What lubricating oil should be used for treadmill lubrication?
The suggestion of Taiyuan 153 Fitness Equipment City is silicon lubricant. The advantage of silicon lubricant is good flexibility and no adverse reaction. Of course, some treadmills are suitable for paraffin lubricant, depending on the actual model.
You can ask the treadmill manufacturer for details.
How to lubricate the running belt of the treadmill?
first step
Turn off the treadmill, unplug the power supply, and loosen the screws on both sides of the machine with a screwdriver.
Second step
Gently lift both sides of the running belt to ensure that you can see the surface of the running board.
Third step
Spray lubricant along both sides of the treadmill running board, and be careful not to drip on the floor. If you accidentally spray it somewhere else, wipe it gently with a rag dipped in alcohol.
part four
Put it back in its original position and tighten the screws.
Step five
Plug in the power again and let the treadmill run at a speed of 2km/h for 5 minutes to ensure that the lubricating oil can be evenly distributed.