First, power failure
If the treadmill can't start or power is cut off unexpectedly, first check whether the power supply is plugged in, whether the power supply works normally and whether the grounding wire is connected properly. If there are no problems above, it may be that the power board is damaged and needs to be repaired or replaced.
Second, the display screen failure
If the display screen of the treadmill is abnormal, such as black screen or abnormal display, you can try plugging and unplugging the connecting cable again to check whether it is loose. If the cable is normal, it is likely that the display screen is faulty and needs to be replaced.
Third, the drive system is out of order.
If the driving system of the treadmill is found to be abnormal during use, such as slipping or abnormal sound, it is necessary to check whether the belt tension is appropriate and whether it needs to be adjusted. If the problem is still not solved after adjustment, the detachable drive system should be inspected to see if the corresponding parts need to be replaced.
Fourth, deal with sensor failure
The handle sensor is an important sensor on the treadmill. If something goes wrong, it will affect the use of the whole treadmill. For the failure of the handle sensor, you can adjust the position of the handle or replace the sensor.
When using the treadmill, you must pay attention to maintenance. It is very important to clean and lubricate regularly and deal with faults in time, which can not only ensure the service life of the treadmill, but also ensure your safety. If the above methods can't solve the problem, it is recommended to contact the original after-sales service of the treadmill and accept professional maintenance.