1. According to the packing list of DHZ treadmill, check whether all parts and tools are complete and ensure that no parts are damaged or lost.
2. Set the DHZ treadmill in a suitable position and turn it on, and find the positions of all parts according to the machine structure diagram in the manual.
3. Connect the bottom bracket assembly of DHZ treadmill with the corresponding parts on the bottom plate and fix them with screws.
4. Place the main frame assembly on the base bracket assembly and fix it with screws.
5. Lift the running belt with a sling and connect it to the motor bracket assembly, and then unfold the running belt according to the instructions in the manual.
6. Fix HB 12 main console assembly and four fixing screws on the motor bracket assembly.
7. Install the controller on the main circuit board and handle of the treadmill, and then fix the handle and governor of the treadmill.
8. Finally, according to the instructions, connect the circuit, plug in the power cord and turn on the power supply, and the DHZ treadmill can be used.
It should be noted that before using the DHZ treadmill, all components must be firmly installed, and the running belt should be tensioned and the moving parts should be lubricated and maintained. In addition, when using DHZ treadmill, you must follow the instructions and safety regulations to ensure the safety of users.