Question 2: How is this belt fastened? There are pictures ... on the pictures. Can you see it clearly?
Question 3: How to Tie a Bow Belt Graphic Video Tutorial How to Tie a Bow Belt:
1. First, fold the belt into equal lengths and put it in front of the waist. 2. As shown in Figure 2, fold the left waistband inward with the corner of the waistband located below. 3. Fold the right waistband reversely, bypassing the folded left waistband and reaching below the folded waistband, as shown in Figure 3; 4. Fold the wrapped right waistband outward and fix it by hand; 5. Put the folded right belt through the vertical knot formed by bypassing the left belt just now and arrange it into a suitable shape.
Question 4: How to fasten the waist of wide pants depends on what coat you wear. If you are dressed formally, you can tuck your shirt in. It is usually better to wear a small bow tie. But you can't wear that beautiful belt. If you don't like this style, you can also wear a loose coat and hide your belt inside. Of course, if you have elastic bands on your pants, you can wear them without them.
Question 5: Excuse me, how to fasten the back of men's windbreaker belt? . . It is best to have a full set of pictures or videos. I think many people simply take off their belts and say it's weird to tie a bow ... or tie them on the side as shown in the picture below.
However, I have seen funny people say, wrap it around your waist first, then hang a bunch of spoons on the left, and jingle when you walk, indicating that you have strength. The right side can't be empty. Get a top-class cottage machine the size of a brick, the kind that can be placed on the moon, put on an artificial leather cover and pin it to your waist. When walking, the wind blows the skirts and long, discerning hair, so that the wind can take the moon far away. ........
Question 6: How to fasten a belt with two rings in front? Step 1: There are two rings, one is long and the other is short. First, pass one end of the belt through two rings at the same time.
Step 2: Open the double-ring buckle.
Step 3: Bypass the short ring and come back from the long ring.
Step 4: Open the small ring slightly with one hand, and then pull the belt. If it's too tight, just pull it onto the strap of the bag like that.
Question 7: How to tie a belt behind your coat to make a video of the intersection? First of all, the first two crossed belts
2. The following bands overlap.
3. Put it in
Fourth, pick up the belt above.
5. On the tape below.
6, from the top of the steel strip, through the bottom.
waistband
7 finish
Question 8: How to fasten the belt of beach pants? Step 1: First, fold the belt around your waist and put it in front of your waist.
Step 2: Fold the left waistband inward with the waistband angle below. Fold the right belt upside down, bypass the left belt and reach under the folded belt.
Step 3: Fold the wrapped right waistband outward and fix it by hand. Pass the folded right belt through the vertical knot formed just around the left belt and arrange it into a suitable shape. According to this procedure, the position of the bow tie is relatively correct and it is not easy to deform.
Fasten the belt, and then fasten it:
The back buckle method is a very practical belt buckle method, which is mainly aimed at the characteristics of men's windbreaker belts. The following are the steps to introduce the fastening method of seat belts:
First, put the short side of the belt under the long side and wrap the short belt around it. Note that the belt must be tightened at this time.
Secondly, the long belt rolls up from under the short belt to form folds.
Finally, the long belt is folded, and the folded belt passes through the short loop to complete a beautiful belt segment.
Question 9: How to tie the belt of sweatpants to look good? It's good to ask the great god for help.
Hope to adopt
Question 10: How to tie a bow belt;
1. First, fold the belt into equal lengths and put it in front of the waist. 2. As shown in Figure 2, fold the left waistband inward with the corner of the waistband located below. 3. Fold the right waistband reversely, bypassing the folded left waistband and reaching below the folded waistband, as shown in Figure 3; 4. Fold the wrapped right waistband outward and fix it by hand; 5. Put the folded right belt through the vertical knot formed by bypassing the left belt just now and arrange it into a suitable shape.