(1) Obviously, the most common reason for running belt slippage of treadmills is that the running belt is too loose. At this time, you only need to adjust the balance bolt at the back end of the running belt (rotate it clockwise until it is reasonable). For specific adjustment methods, please refer to judging the tightness of the treadmill running belt, and how to adjust the treadmill running belt. 》。

(2) The running belt of the treadmill slips, or the multi-groove belt of the treadmill is too loose. At this time, the fixed position of the motor can be adjusted.

2. The running belt of the treadmill is biased.

The phenomenon of running belt deviation of treadmill is quite common, which was specially introduced by Master Wan. The problem at this time may be that the running posture is not very standard, and the left and right feet are uneven, which leads to the imbalance between the front axle and the rear axle of the treadmill. Both of these reasons need to adjust the balance of the drum.

3. The treadmill display flashes

(1) The display of the treadmill flashes. It is possible that the grounding wire is not connected properly, causing electrostatic interference. At this time, we can only try to change the socket.

(2) The flicker of the display screen may also be due to poor contact of the control line, so the control line is connected.

There will be noise when you exercise on the treadmill.

(1) There is noise when running on the treadmill, which may be caused by a foreign object caught between the running belt and the running board. Remove foreign objects when you see them.

(2) There is noise when the treadmill is moving, which may be motor noise. Just change the motor, of course, you can choose not to change it without affecting the use.

(3) The noise may be caused by the small space between the cover and the running belt, resulting in friction between the cover and the running belt; As long as the cover is corrected or replaced, the problem can be solved.

(4) There is noise when the treadmill is moving, or it may be that the running belt is seriously deviated and rubs against both sides of the running board; There is no way but to adjust the balance of the running belt. Please refer to 1 topic for specific adjustment methods.

5. Turn on the power and turn on the power switch. The power indicator is not on.

(1) Turn on the power and turn on the power switch. The power indicator is not on. The possible reason is that the internal wiring of the switch is loose. At this time, you can open the upper shield and check whether the wiring is loose.

(2) The power indicator does not light up, probably because the switch may be damaged. At this time, only the switch can be replaced.

(3) The power indicator is not on. The possible reason is that the three-phase plug is not inserted in place, that is, there is no power supply. Try changing the socket several times.

(4) It is also possible that the three-phase plug is damaged, so just replace the three-phase plug.

6. Running and stopping of the treadmill (automatic stop)

(1) When the treadmill stops automatically, you can check the cables first. If there is a problem with the internal cable, you can only find professional fitness equipment maintenance personnel to repair it.

(2) Then check, please check the wiring problem carefully. If the treadmill stops running due to short circuit, please reconnect or replace the line.

(3) The automatic stop of the treadmill may be caused by a problem with the transmission plate, and the maintenance method is only to replace the transmission plate.

7. The treadmill is vibrating more and more.

(1) The vibration of the treadmill is getting bigger and bigger. Check whether the vibration is caused by the motor and replace the motor.

(2) The vibration of the treadmill is getting bigger and bigger. You can check the grooves of the multi-groove belt, and then you can clean the grooves.

(3) The treadmill vibrates more and more. You can check whether the front and rear rollers rotate abnormally, and the rollers should be replaced at this time.

8. The treadmill won't start.

(1) The treadmill can't start, just press the switch and there is no response. It may be that the switch of the electric treadmill is broken, so it is better to replace the power switch.

(2) The treadmill can't be started. It is possible that the fuse is blown. Replace the fuse.

(3) The treadmill can't start, or it may not be plugged in or blocked. Please check the power supply first.

(4) If the above problems do not exist, you can only contact the treadmill manufacturer or the fitness equipment maintenance master.

9. Treadmill button doesn't work

(1) Treadmill button doesn't work. It is possible that the keys are aging and need to be replaced.

(2) If the keys on the treadmill are not working properly, the key circuit board may be loose. Lock the keypad circuit board and try again.

10. The electronic watch button of the treadmill is invalid.

If the buttons of the electronic watch on the treadmill are invalid, you can check whether the cables of the buttons inside the electronic watch are broken, broken or fall off, or the floor of the electronic watch is not locked properly. You can turn on the electronic watch first and lock the fixing screws of the key electronic board. If it doesn't work, you can only replace the electronic watch.

1 1. When the electric treadmill is running, the motor makes noise.

(1) When the electric treadmill is moving, the motor makes noise, which may be caused by the friction between the motor and nearby objects. Similarly, if there are sundries, remove them.

(2) When the electric treadmill is moving, the motor is noisy and the carbon brush may be seriously worn. The maintenance method is to check or replace the carbon brush.

12. The electric treadmill cannot accelerate.

(1) The electric treadmill cannot accelerate. Maybe the internal sensor is broken. If the sensor is damaged, please replace it.

(2) The electric treadmill can't accelerate or the driving plate is broken. In this case, please replace the drive plate.

(3) The failure of the electric treadmill to accelerate may be due to the damage of the instrument panel, in which case the instrument panel needs to be replaced; Eliminate the causes one by one, and then fix them.

13. The treadmill cannot accelerate or decelerate.

(1) Check whether the key wire inside the electronic watch is broken, broken or falling off. Only the electronic watch can be replaced at this time.

(2) Check whether the connecting cable connector is in poor contact. If it is in poor contact, replace the wiring.

(3) If the electronic instrument is defective or the motor control panel is defective, replace the control panel.